ARTHUR HOLM DynamicCableRetract Instrucciones de montaje - Página 7

Navegue en línea o descargue pdf Instrucciones de montaje para Cables y conectores ARTHUR HOLM DynamicCableRetract. ARTHUR HOLM DynamicCableRetract 10 páginas.

Imprimir página

DynamicCableRetract

Place

the

housing with the brackets into the

installed table brackets as shown on the

drawing below. Insert the two M6 nuts.

Tighten

each

DynamicCableRetract top plate surface is flush with of the

table surface or cover plate:

For the standard installation, flush the top plate surface

with the top surface of the table.

For the installation with Cover Plate, place the Cover

Plate over the table surface and flush the top plate with

the top Surface of the Cover Plate. Do not stick the cover

plate at this moment.

Mounting the DynamicCableRetract

nut

gradually

until

the

View from

below the table

View from

above the table

Cover Plate