ARTHUR HOLM DynamicCableRetract Montage-instructies - Pagina 7
Blader online of download pdf Montage-instructies voor {categorie_naam} ARTHUR HOLM DynamicCableRetract. ARTHUR HOLM DynamicCableRetract 10 pagina's.
Pagina afdrukkenDynamicCableRetract
1-
Place
the
housing with the brackets into the
installed table brackets as shown on the
drawing below. Insert the two M6 nuts.
2-
Tighten
each
DynamicCableRetract top plate surface is flush with of the
table surface or cover plate:
-
For the standard installation, flush the top plate surface
with the top surface of the table.
-
For the installation with Cover Plate, place the Cover
Plate over the table surface and flush the top plate with
the top Surface of the Cover Plate. Do not stick the cover
plate at this moment.
Mounting the DynamicCableRetract
nut
gradually
until
the
View from
below the table
View from
above the table
Cover Plate
7