Artidor AR-024 Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Accesorios Artidor AR-024. Artidor AR-024 8 páginas. Explosion-safe occupancy sensor

monitoring large areas. The occupancy sensor is designed for use inside large buildings for example warehouses and

combines energy saving and the protection of the environment in addition to convenient lighting.

Motion sensors switch the light depending on movements and the ambient light. Lighting will be switched off. The

sensor itself does not emit any radiation and is therefore called "passive". Unlike motion sensors, occupancy sensors

can also switch off lighting if there is sufficient daylight, because of their advanced mixed light measurement (the

principle on which occupancy sensors are based). Do not install sensors near heat sources like air-conditioning units,

lights or radiators. The sensor electronics offers an potential free contact for switching up to 1,150 VA load.

The occupancy sensor is mounted on top of a coated aluminum housing. The explosion safety to gas and dust is

arranged by the appliance of protection degrees against ignition "encapsulation", "molding" and "protected by

enclosure".

The Artidor AR-024 occupancy sensor is certified in accordance with European Directive 2014/34/EU (ATEX 114) for

use in gas or dust hazardous areas and is CE marked.

User manual explosion-safe AR-024 occupancy sensor

Issue April 2020

3 / 8