Artidor AR-024 Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Accesorios Artidor AR-024. Artidor AR-024 8 páginas. Explosion-safe occupancy sensor
Imprimir página
Switch power AC1:
Output:
Electrical connections:
Material:
Entries:
Sealed against moisture and dust:
Mounting bracket:
Ambient temperature:
Housing dimensions (L x W x H):
Sensor dimensions
Weight:
7.
Marking and warning on the equipment
The marking label as shown below will be attached to the occupancy sensor:
II 3 G Ex ec mc IIC T6 Gc
II 3 D Ex mc tc IIIC T80ºC Dc
Cert. ARTIDOR 20ATEX9999X
TF & Serial No.: AS123456
ARTIDOR Explosion Safety B.V.
Emopad 38, 5663 PB Geldrop, The Netherlands, www.artidor.com
8.
Installation instructions
Installation of explosion-safe equipment such as this product must be carried out by personnel specially trained
and qualified to do this, following the relevant requirements of the installation standard EN 60079-14.
For the installation and use of this product the relevant safety regulations and also the generally recognized latest
state of the technology apply.
During assembly, care must be taken that the framework, screws and surface are strong enough to take the
weight of the occupancy sensor.
Isolate power from the electrical supply cable prior to installation.
Install the connection cable and make sure that it is protected from mechanical and chemical influences.
User manual explosion-safe AR-024 occupancy sensor
Issue April 2020
1,150 VA (resistive and light inductive loads)
Potential free contact
Terminals 8 x 2,5 mm²
Die cast aluminum housing (RAL 7015, slate grey), cable glands nickel plated
brass
M16 or M20 cable glands (2x)
IP 65 according to EN 60529
Stainless steel mounting bracket, mounting holes Ø 6,5 (4x), distance 60 x 60 mm
-20 ˚C to +50 ˚C
120 x 120 x 195 mm (including mounting bracket, excluding cable glands)
65 x Ø98 mm
1,860 g (incl. mounting bracket)
OCCUPANCY SENSOR
Type: AR-024
230 VAC, IP65
Year: 2020
-20 °C < Ta < +50 °C
5 / 8