Cleco Tools CellCore P2402KA Manual de instalación rápida - Página 11
Navegue en línea o descargue pdf Manual de instalación rápida para Controlador Cleco Tools CellCore P2402KA. Cleco Tools CellCore P2402KA 16 páginas. Data transmission
Imprimir página
Abb. 3-5: RF Settings
Parameter
SSID
Encryption
Network key
Confirm network key
Hostname
Obtain an IP address
automatically (DHCP)
Use the following IP
address
IP address
Subnet mask
Default Gateway
Transport
IP conflict detection
7.
Select <Advanced settings>.
→ The WLAN Advanced Settings window opens to set the wireless channel.
Parameter
Wireless mode
5.2 GHz radio band
(802.11a)
Apex Tool Group
Description
Enter SSID. SSID must be identical to the access point.
Select WPA/WPA2-PSK TKIP or WPA/WPA2-PSK AES.
Enter the network key. The network key must be identical to the access
point.
Confirm the network key.
Optionally, a hostname can be entered.
Do not select this option. The IP address is automatically assigned.
Enter the IP address manually.
Enter the IP address.
For the mPro200GC-AP, the first three blocks of the IP address are fixed
and must not be changed: 192.168.245.xxx
In the last block, numbers between 1 and 49 can be assigned as a static
address.
Enter the subnet mask.
IP address that is assigned by the access point.
The default value
is:
192.168.245.250
Select TCP.
– Setting not programmed –
Description
Select the WLAN mode:
•
Select 802.11b/g/n if a frequency band of 2.4 GHz is used.
•
Select 802.11a if a frequency band of 5 GHz is used.
Select frequency band.
This setting is only possible if the 5 GHz frequency band has been
selected.
P2402KA | 2019-05
Setting up the mPro200GC-AP
11
3
EN