Cleco Tools CellCore P2402KA 빠른 설치 매뉴얼 - 페이지 11

{카테고리_이름} Cleco Tools CellCore P2402KA에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cleco Tools CellCore P2402KA 16 페이지. Data transmission

페이지 인쇄

Abb. 3-5: RF Settings

Parameter

SSID

Encryption

Network key

Confirm network key

Hostname

Obtain an IP address

automatically (DHCP)

Use the following IP

address

IP address

Subnet mask

Default Gateway

Transport

IP conflict detection

Select <Advanced settings>.

→ The WLAN Advanced Settings window opens to set the wireless channel.

Parameter

Wireless mode

5.2 GHz radio band

(802.11a)

Apex Tool Group

Description

Enter SSID. SSID must be identical to the access point.

Select WPA/WPA2-PSK TKIP or WPA/WPA2-PSK AES.

Enter the network key. The network key must be identical to the access

point.

Confirm the network key.

Optionally, a hostname can be entered.

Do not select this option. The IP address is automatically assigned.

Enter the IP address manually.

Enter the IP address.

For the mPro200GC-AP, the first three blocks of the IP address are fixed

and must not be changed: 192.168.245.xxx

In the last block, numbers between 1 and 49 can be assigned as a static

address.

Enter the subnet mask.

IP address that is assigned by the access point.

The default value

is:

192.168.245.250

Select TCP.

– Setting not programmed –

Description

Select the WLAN mode:

•

Select 802.11b/g/n if a frequency band of 2.4 GHz is used.

•

Select 802.11a if a frequency band of 5 GHz is used.

Select frequency band.

This setting is only possible if the 5 GHz frequency band has been

selected.

P2402KA | 2019-05

Setting up the mPro200GC-AP