djm direct DJMBD13-40 Manual de instrucciones original - Página 14

Navegue en línea o descargue pdf Manual de instrucciones original para Taladro djm direct DJMBD13-40. djm direct DJMBD13-40 19 páginas. Bench drill

Problem

Dirt, grease, or oil on the tapered surface on the

spindle or in the chuck

Chuck falls off spindle

1. Defective or broken switch

2. Defective or damaged power cord

Motor will not run

3. Open circuit, loose connections, or burned

out motor

4. Low voltage

Motor stalls

1. Short circuit in motor

2. Incorrect fuses or circuit breakers

3. Overloaded circuit

4. Low Voltage

Cause

Remedy

Clean the tapered surface of both the chuck and

spindle with a household detergent.3. Repair

by Customer Care.

1. Take to a qualified service technician

2. Take to a qualified service technician

3. Take to a qualified service technician

4. Check the power line for the proper voltage.

Use another circuit or have a qualified

1. Take to a qualified service technician

2. Replace with correct fuse or circuit

breaker for the circuit

3. Turn off other machines and retry 4.

Check the power line for the proper

voltage. Use another circuit or have a

qualified electrician upgrade the service.