DJM Suspension ASB2599F Instrucciones de instalación

Navegue en línea o descargue pdf Instrucciones de instalación para Accesorios para automóviles DJM Suspension ASB2599F. DJM Suspension ASB2599F 2 páginas. For chevrolet 1500 2wd

Imprimir página

ASB2599F

Chevrolet 1500 2wd 99-06

INSTALLATION INSTRUCTIONS

NOTE: Products should only be installed by a qualified licensed

mechanic experienced in the installation and removal of suspension

components. Please read instructions from start to finish and verify

the parts in the parts list before beginning installation.

What's Included:

Front anti-sway bar - 1

Pivot Bushings - 2

Tube of Lube - 1

1. Park vehicle on a smooth, level, asphalt or concrete surface. Block rear wheels. Jack

up front end of car and support frame with jack stands. Remove front wheels and tires.

2. Locate and remove the nuts that attach the ends of the OEM anti-sway bar to the end

links. Remove the end links from the lower control arms. Make note of the orientation

of the end link as the new bar will be installed in the similar manner. Remove the bolts

that attach the bar mounting brackets to the frame, and remove the OEM anti-sway

bar from the vehicle.

3. Liberally grease the inner bore of the new polyurethane bushings with lubricant

provided, place the bushings over the new anti-sway bar in the same locations as the

OE configuration. Install the front anti-sway bar using factory hardware and brackets.

Torque mounting bolts to 30-34 ft.-lbs

4. Install the OE bolts, end link grommets, cup washers, and nuts on the bars in the OE

orientation. Torque end link to 30-34 ft/lbs.