DJO Chattanooga Intelect Advanced Series Manual del usuario - Página 9

Navegue en línea o descargue pdf Manual del usuario para Equipamiento médico DJO Chattanooga Intelect Advanced Series. DJO Chattanooga Intelect Advanced Series 19 páginas.

Imprimir página

BATTERY MODULE INSTALLATION

System Pre-installation Preparation

Follow the instructions below to prepare the Intelect Advanced Stim or

Combo Therapy System for installation of the Battery Module.

1. Disconnect the Power Cord from . . .

the power supply.

2. Remove the Rear Panel and

disconnect the Power Cord from

the system.

3. Lift the system from the cart, if

equipped, and place on a level

working surface.

NOTE:

If the system is equipped with an

sEMG module, leave it in place

to maintain sEMG functions for

Channels 1 and 2. The sEMG mod-

ule will not interfere with installa-

tion of the Battery Module to the

system.

WARNING

Disconnect the system from the power source (wall outlet) before

attempting any maintenance, installation, removal or replacement

procedures to prevent electrical shock and possible damage to system.

REAR PANEL

DISCONNECT

POWER CORD

4. Remove the Front Access Panel

and disconnect all existing cables

and Lead Wires.

5. Using the #1 Phillips Screwdriver,

remove the screw securing the

Lanyard to the Front Access

Panel.

NOTE:

Store Front Access Panel for

possible future use if module is

removed.

Intelect Advanced Battery Module

REMOVE

LANYARD