Etac 1600017 Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Ayuda a la movilidad Etac 1600017. Etac 1600017 12 páginas.

Molift MRS Duo / www.etac.com

Make sure the following parts are included in the

package.

Beware of sharp edges at the ends of

the boom.

1. Lay post on the ﬂoor.

2. Use the longest M10x50 bolts.

3. Use allen key, located in top of post) to screw

in bolts.

4. Align the foot, and screw in both bolts.

5. Make sure both bolts are properly fastened.

Important! Use the longest bolts

(M10x50)when installing foot,

shorter bolts may cause collapse.

Assembly

1. Slide washer and post in to boom.

2. Insert bolts trough holes and washer in boom.

3. Use allen key, (located in top of post) to screw

in bolts.

4. Make sure both bolts are properly fastened

Do not stand under the boom

when mounting, use a stand or

similar to support the boom.

Mounting second post, trolley and end stop

1. Slide end stop, trolley and end stop into boom

in described order.

2. Slide washer and post in to boom.

3. Insert bolts trough holes and washer in boom.

4. Use allen key (located in top of post) to screw

in bolts .

5. Make sure both bolts are properly fastened.

Fasten end stops temporary during assembly. Must

be fastened properly with tools after adjustment

of height.

Important! Fasten end stops to

prevent trolley from moving when

adjusting post heigts. Moving

trolley can unintendedly hit the

operator.