DOD Dimension12 Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Equipos de grabación DOD Dimension12. DOD Dimension12 12 páginas.

Dimension12

STUTTER

The Stutter Button (6) is used on the "fly", that is while the sound

sample is being played, the Stutter Button (6) is pressed at the

point where you want the sample to "stutter". When the Stutter

Button (6) is pressed the first time, the Stutter LED lights indicating

a stutter point has been selected. Subsequent presses of the

Stutter Button (6) will return the sound sample to the stutter point

and begin playing from that point. If the sound sample has played

to the end and stopped (play LED off) and a stutter point has been

set, pressing the Stutter Button (6) now will initiate play mode and

will start the sound sample playing from the stutter point. A stutter

point can be easily cleared, by depressing the active memory

bank(s) (the bank(s) with LEDs on), the stutter LED turns off (CAU-

TION: if two banks for 12 second mode have been selected, you

must ensure that you depress BOTH buttons to clear the stutter

point. If only one is accidently pressed, all contents of the memory

bank will also be cleared).

EDITING

Editing of the start and stop points is accomplished by pressing the

Edit Button (8). In this mode, all other buttons and functions are

locked out until both start and stop have been set (or the Edit

Button (8) has been pressed twice). To set the start point, press

the Edit Button (8) once (the green LED blinks). Set the start time

with the encoder wheel and press the Edit Button (8). Set the end

stop point time with the encoder and press the Edit Button (8)

again. Editing the start and stop time can also be done on the fly.

While the sound sample is playing, the Edit Button (8) may be

pressed at the desired start time (green LED lights), the red LED

then continues to flash indicating it is waiting for the stop time to be

set. Pressing the Edit Button (8) again will set the stop time. If it is

not pressed, the sample will continuing playing to the end of the

sampling time, and the end of the buffer will be the default stop

time. For on the fly editing, if any other buttons are pressed e.g.

FX button, the editing function is automatically exited