AkraLab PLUGGO Manuales del usuario - Página 3

Navegue en línea o descargue pdf Manuales del usuario para Equipos de laboratorio AkraLab PLUGGO. AkraLab PLUGGO 15 páginas. Automated de-capper

Waste of biohazard material

When Pluggo is in operation, the de-capped plugs have to be collected and handled as

biohazard waste. The chute mounted on Pluggo will guide the plugs to the right side of

the equipment. As an option, a special chute for left hand mounting could be ordered.

In this case however, the installation of Pluggo must not disable easy access to the

control panel and the Red emergency stop.

Cleaning and disinfecting of equipment

Use clinic disinfectant solution only. Use cleaning cloth. Do not use spray solution on

Pluggo unit.

Note: Do not use Bleach on Pluggo unit.

Further instructions is found under Cleaning/Service instructions.

Emergency stop

If any unexpected happens during operation, press the Red stop button.

After removing the carousel from the driving disk, press stop button once again to reset

and if necessary press Start button to let Pluggo go to the normal "home position".

Unpacking and inspections

At arrival of delivery, please check for any transportation damage prior to installation. It

is recommended to save the transportation package for later service or repair

shipment.

Supply voltage

Note: Please check that the supply voltage indicated on Pluggo sign at the bottom of

the unit corresponds to your local supply voltage.

[email protected] · 965 116 521 · 902 222 275 · www.akralab.es