AkraLab PLUGGO Manuels d'utilisation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuels d'utilisation pour {nom_de_la_catégorie} AkraLab PLUGGO. AkraLab PLUGGO 15 pages. Automated de-capper

Imprimer la page
Waste of biohazard material
4.
When Pluggo is in operation, the de-capped plugs have to be collected and handled as
biohazard waste. The chute mounted on Pluggo will guide the plugs to the right side of
the equipment. As an option, a special chute for left hand mounting could be ordered.
In this case however, the installation of Pluggo must not disable easy access to the
control panel and the Red emergency stop.
Cleaning and disinfecting of equipment
5.
Use clinic disinfectant solution only. Use cleaning cloth. Do not use spray solution on
Pluggo unit.
Note: Do not use Bleach on Pluggo unit.
Further instructions is found under Cleaning/Service instructions.
Emergency stop
6.
If any unexpected happens during operation, press the Red stop button.
After removing the carousel from the driving disk, press stop button once again to reset
and if necessary press Start button to let Pluggo go to the normal "home position".
Unpacking and inspections
7.
At arrival of delivery, please check for any transportation damage prior to installation. It
is recommended to save the transportation package for later service or repair
shipment.
Supply voltage
8.
Note: Please check that the supply voltage indicated on Pluggo sign at the bottom of
the unit corresponds to your local supply voltage.
[email protected] · 965 116 521 · 902 222 275 · www.akralab.es
3