DOEPFER A-100 Series Manual - Página 3

Navegue en línea o descargue pdf Manual para Sintetizador DOEPFER A-100 Series. DOEPFER A-100 Series 6 páginas. Analog modular system, connecting the breakout module to the main module
También para DOEPFER A-100 Series: Manual de instrucciones (8 páginas), Manual (16 páginas), Manual del usuario (12 páginas), Manual de montaje y cableado (6 páginas), Manual (8 páginas), Manual (8 páginas), Conexión (8 páginas)

Imprimir página
DOEPFER A-100 Series Manual
doepfer
3. Controls
1 Gain
Use control 1 to set the level of input gain for the
speech signal at socket !.

2 Treble Boost

Control 2 is used to increase the level of the high
frequencies in the speech signal input. Often, using
this control makes speech more easily intelligible.
H
To produce the best results, please also look
at the general instructions (chapter 5) in the
manual for the main vocoder modules, A-129
/1 and A-129 /2.
3 LED
This LED indicator 3 shows the status of the swit-
ching in the voiced / unvoiced detector:
• LED on :
"Unvoiced"
• LED off :
"Voiced"
System A - 100
4. In / Outputs

! Speech Input

The speech signal is patched into Speech-input !.

" Speech Output

Speech output " puts out the amplified and equalised
(treble-boosted) speech input signal. This output is
patched to the speech input socket on the A-129 /1
analysis module.
§ Gate Output
Gate output § puts out a gate signal, depending on
the status of the voiced/unvoiced detector:
• "Unvoiced" (LED 3 on) : "high"
• "Voiced" (LED 3 off) :
You can use this gate signal for more elaborate sound
manipulation (see 5. User examples).
Voiced/Unvoiced Detector
"low"
A-129 /5
3