Dogtra 3502NCP Super-X Manual de configuración de códigos - Página 2

Navegue en línea o descargue pdf Manual de configuración de códigos para Producto para el cuidado de mascotas Dogtra 3502NCP Super-X. Dogtra 3502NCP Super-X 4 páginas. Remote controlled dog training collars

Imprimir página

1
2
3
4

CONTENTS

Code setting for your newly replaced

3500NCP Super-X Transmitter (One-Dog)

Code setting for your newly replaced

3500NCP Super-X Receiver (One-Dog)

Code setting for your newly replaced

3502NCP Super-X Transmitter (Two-Dog)

Code setting for your newly replaced

3502NCP Super-X Black Collar/Receiver for

(Two-Dog)

Code setting for your newly replaced

3502NCP Super-X Orange Collar/Receiver for

(Two-Dog)

Code setting for your newly replaced

3500NCP Super-X Transmitter (One-Dog)

1

Once you have received the transmitter that was sent to you

by the Dogtra facility, you need to code set your unit to control

your Receiver with the new Transmitter.

The code setting method is as follows:

2

2

5

5

indicator light blinks once every 4 seconds after staying on

green for about a second. Now the setting work is completed.

1) Turn the Transmitter on by

pushing the ON/OFF Switch

located on the right side then

select the level 0 with the

Intensity Selection Dial.

2) Place the red dot on the back of

the transmitter to the red dot on

the collar/receiver. Hold the two

red dots together for about 5

seconds or more. Release them

when the green LED blinks fast

on the collar/receiver.

3) Within 5 seconds after releasing

the transmitter and the receiver,

hold the Nick button and the

Constant button together located

on the left side of the transmitter

Together

for 3 seconds, or until the rapid

green blink resumes to a slower

paced green blink. The LED

1

1
2
3
4