- ページ 2

ペットケア製品 Dogtra 3502NCP Super-XのPDF コード設定マニュアルをオンラインで閲覧またはダウンロードできます。Dogtra 3502NCP Super-X 4 ページ。 Remote controlled dog training collars

CONTENTS
Code setting for your newly replaced
3500NCP Super-X Transmitter (One-Dog)
Code setting for your newly replaced
3500NCP Super-X Receiver (One-Dog)
Code setting for your newly replaced
3502NCP Super-X Transmitter (Two-Dog)
Code setting for your newly replaced
3502NCP Super-X Black Collar/Receiver for
(Two-Dog)
Code setting for your newly replaced
3502NCP Super-X Orange Collar/Receiver for
(Two-Dog)
Code setting for your newly replaced
3500NCP Super-X Transmitter (One-Dog)
1
Once you have received the transmitter that was sent to you
by the Dogtra facility, you need to code set your unit to control
your Receiver with the new Transmitter.
The code setting method is as follows:
2
2
5
5
indicator light blinks once every 4 seconds after staying on
green for about a second. Now the setting work is completed.
1) Turn the Transmitter on by
pushing the ON/OFF Switch
located on the right side then
select the level 0 with the
Intensity Selection Dial.
2) Place the red dot on the back of
the transmitter to the red dot on
the collar/receiver. Hold the two
red dots together for about 5
seconds or more. Release them
when the green LED blinks fast
on the collar/receiver.
3) Within 5 seconds after releasing
the transmitter and the receiver,
hold the Nick button and the
Constant button together located
on the left side of the transmitter
Together
for 3 seconds, or until the rapid
green blink resumes to a slower
paced green blink. The LED
1