Clockaudio SM80S Series Manual de instalación - Página 2

Navegue en línea o descargue pdf Manual de instalación para Sistema de micrófono Clockaudio SM80S Series. Clockaudio SM80S Series 2 páginas.

Installation Guide (illustrations show SM80S)
1) Ensure minimum table thickness of 25mm
(1").
2) Drill a 50mm (2") hole through the table
see fig A.
3) Remove the 3 M3 pan headed screws from
the bottom plate see fig B.
4) Remove the 2 M3 x 30mm pan headed
screws securing the base plate to the top
assembly see fig C.
5) SM80S Only----Select the LED voltage by
moving the jumper to the required
position see fig D.
6) Fit the top assembly through the 50mm
(2") hole see fig E.
7) Re-fit the base plate to the assembly using
the 2 M3 x 30mm screws adjusting the
nuts to clamp the top assembly and the
bottom plate to the table ensuring that the
top assembly is correctly aligned before
finally tightening the nuts see fig F.
8) Re-fit the bottom plate to the shock
mounts using the 3 M3 pan headed
screws. Adjust the height of the PPA-RF
and secure with nut supplied see fig G.
9) Installation complete see fig H.