Clockaudio SM80S Series 설치 매뉴얼 - 페이지 2

{카테고리_이름} Clockaudio SM80S Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clockaudio SM80S Series 2 페이지.

Installation Guide (illustrations show SM80S)

1) Ensure minimum table thickness of 25mm

(1").

2) Drill a 50mm (2") hole through the table

see fig A.

3) Remove the 3 M3 pan headed screws from

the bottom plate see fig B.

4) Remove the 2 M3 x 30mm pan headed

screws securing the base plate to the top

assembly see fig C.

5) SM80S Only----Select the LED voltage by

moving the jumper to the required

position see fig D.

6) Fit the top assembly through the 50mm

(2") hole see fig E.

7) Re-fit the base plate to the assembly using

the 2 M3 x 30mm screws adjusting the

nuts to clamp the top assembly and the

bottom plate to the table ensuring that the

top assembly is correctly aligned before

finally tightening the nuts see fig F.

8) Re-fit the bottom plate to the shock

mounts using the 3 M3 pan headed

screws. Adjust the height of the PPA-RF

and secure with nut supplied see fig G.

9) Installation complete see fig H.