Clockaudio SM80S Series 설치 매뉴얼

{카테고리_이름} Clockaudio SM80S Series에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clockaudio SM80S Series 2 페이지.

페이지 인쇄

A low profile through table shock mount microphone base fitted with a flip cover to conceal the

connector when closed.

Switch connections

Applicable for Clockaudio microphones only

3 Pin Tini Q Wiring

PIN 1 Phase –

PIN 2 Phase +

PIN 3 Ground

3 Pin Male XLR Wiring

PIN 1 Ground

PIN 2 Phase +

PIN 3 Phase

www.clockaudio.com



Designed for remote switching.



Low profile table mounted microphone base.



Requires a minimum table thickness of 25mm (1")



Includes a concealed flap to allow the table to be

used for other purposes.



Built in shock mount to eliminate surface bound

noise.



Fitted with momentry (PTT) or latching switch.



Bi-colour common anode LED to confirm status



Housing PPA-RF for use with Clockaudio mics C

3100, C 310R, C 313/SR, C 314/SR.



Terminated with RJ 45 connector and supplied

with RJ 45 coupler which allows connection via RJ

12 or RJ 45 plug back to dsp.

Architects and Engineers Specifications for Mi-

crophone Shock Mount SM 80S-RF

It shall come complete with a dedicated phan-

tom power adaptor designed to power the C

3100 miniature gooseneck microphones termi-

nated with Tini Q 3 pin connectors. The Phan-

tom power adaptor shall accept 9 to 48 volts DC

and have impedance of 200 ohms. The phan-

tom power adaptor shall also include filters,

which shall eliminate all GSM frequencies from

800-1200 MHz and be terminated with a male 3

pin XLR. The microphone shock mount shall be

available in satin Nickel or Black Nextel finishes.

The through table microphone shock mount

shall be a Clockaudio SM 80S-RF.