DogWatch BigLeash V-10 Manual del usuario - Página 14
Navegue en línea o descargue pdf Manual del usuario para Producto para el cuidado de mascotas DogWatch BigLeash V-10. DogWatch BigLeash V-10 20 páginas. Vibration trainer
Imprimir página
Troubleshooting
The Remote Trainer Does Not Seem To Be Working
Check to make sure the batteries in both the transmitter and the
•
receiver are charged.
Check to see that both the transmitter and receiver are turned "on".
•
Note: The transmitter and receiver will not turn on when charging.
If fully charged but not turning on, press the ((V)) button on the transmitter
•
and check the LCD screen. If the transmitter icon displays, follow the
reprogramming instructions on page 16. If the icon does not display, or if
reprogramming does not work, please call Customer Service.
Dog Does Not Seem To Respond
Check to see that the collar is snug enough for your dog to feel the vibration.
•
Check the vibration. If it is on a low setting, try increasing the vibration level.
•
If your transmitter is programmed for use with 2 dogs, check to see that your
•
transmitter is set to the correct collar.
The Transmitter Range Is Reduced
The range may be affected by variations in terrain, weather, buildings and
•
other obstructions.
For best operation hold the transmitter with the antenna pointed toward the
•
sky, not towards the dog.
Keep your fingers away from the antenna. Touching the antenna will greatly
•
reduce the range.
12