DogWatch BigLeash V-10 소유자 매뉴얼 - 페이지 14

{카테고리_이름} DogWatch BigLeash V-10에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DogWatch BigLeash V-10 20 페이지. Vibration trainer

Troubleshooting

The Remote Trainer Does Not Seem To Be Working

Check to make sure the batteries in both the transmitter and the

•

receiver are charged.

Check to see that both the transmitter and receiver are turned "on".

•

Note: The transmitter and receiver will not turn on when charging.

If fully charged but not turning on, press the ((V)) button on the transmitter

•

and check the LCD screen. If the transmitter icon displays, follow the

reprogramming instructions on page 16. If the icon does not display, or if

reprogramming does not work, please call Customer Service.

Dog Does Not Seem To Respond

Check to see that the collar is snug enough for your dog to feel the vibration.

•

Check the vibration. If it is on a low setting, try increasing the vibration level.

•

If your transmitter is programmed for use with 2 dogs, check to see that your

•

transmitter is set to the correct collar.

The Transmitter Range Is Reduced

The range may be affected by variations in terrain, weather, buildings and

•

other obstructions.

For best operation hold the transmitter with the antenna pointed toward the

•

sky, not towards the dog.

Keep your fingers away from the antenna. Touching the antenna will greatly

•

reduce the range.