ASHAPOWER NEON-30 Manual del usuario - Página 13
Navegue en línea o descargue pdf Manual del usuario para Controlador ASHAPOWER NEON-30. ASHAPOWER NEON-30 14 páginas. Solar mppt charge controller
También para ASHAPOWER NEON-30: Manual del usuario (14 páginas)
Imprimir página
IMPORTANT SAFETY PRECAUTIONS
1) Solar panels should be grouped in such a way that the maximum Open
Circuit Voltage (Voc) of the panels connected in series should not exceed the
Maximum PV panel voltage recommended.
2) Safety precautions must be taken while grouping and connecting PV panels
to the charge controller with high Voc input. (750 Volt DC current from the PV
panel is highly dangerous. Never touch the terminals without safety glows)
3) Extreme care should be taken while connecting High voltage solar power
systems.
4) Earthing and wiring of high power solar system must be done under the
supervision of a qualified electrical engineer
5) Never connect the PV panel connection to the battery input or the connection
of the batteries to the PV input.
6) Never connect any of the grid line to any of the DC (PV or Battery) connection
terminals. Use always weather proof highly insulated solar DC wires for PV
panel grouping.
7) The installation and use must comply with the local safety instructions and
standards in force.
8) Never use a flame or any kind of spark producing device near fully
charged batteries as it may cause an explosion of the batteries and fire
hazard.(eg: Checking battery water level under a candle flame light, spark
from a metal cutter or spark from loose contact of battery connecting
wires)
We disclaim all responsibility and liability for damage, costs or losses resulting
9)
from an installation that does not comply with the instructions, a faulty operation
or inadequate maintenance.
10) The use of the charger is in any case under the responsibility of the
customer.
11) THIS EQUIPMENT IS NEITHER DESIGNED NOR GUARANTEED TO INSTALLATIONS ENTAILING
POTENTIAL RISKS OF DAMAGE TO PEOPLE OR TO THE ENVIRONMENT
12