ASHAPOWER NEON-30 사용자 설명서 - 페이지 13

{카테고리_이름} ASHAPOWER NEON-30에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ASHAPOWER NEON-30 14 페이지. Solar mppt charge controller
ASHAPOWER NEON-30에 대해서도 마찬가지입니다: 사용자 설명서 (14 페이지)

페이지 인쇄

IMPORTANT SAFETY PRECAUTIONS

1) Solar panels should be grouped in such a way that the maximum Open

Circuit Voltage (Voc) of the panels connected in series should not exceed the

Maximum PV panel voltage recommended.

2) Safety precautions must be taken while grouping and connecting PV panels

to the charge controller with high Voc input. (750 Volt DC current from the PV

panel is highly dangerous. Never touch the terminals without safety glows)

3) Extreme care should be taken while connecting High voltage solar power

systems.

4) Earthing and wiring of high power solar system must be done under the

supervision of a qualified electrical engineer

5) Never connect the PV panel connection to the battery input or the connection

of the batteries to the PV input.

6) Never connect any of the grid line to any of the DC (PV or Battery) connection

terminals. Use always weather proof highly insulated solar DC wires for PV

panel grouping.

7) The installation and use must comply with the local safety instructions and

standards in force.

8) Never use a flame or any kind of spark producing device near fully

charged batteries as it may cause an explosion of the batteries and fire

hazard.(eg: Checking battery water level under a candle flame light, spark

from a metal cutter or spark from loose contact of battery connecting

wires)

We disclaim all responsibility and liability for damage, costs or losses resulting

from an installation that does not comply with the instructions, a faulty operation

or inadequate maintenance.

10) The use of the charger is in any case under the responsibility of the

customer.

11) THIS EQUIPMENT IS NEITHER DESIGNED NOR GUARANTEED TO INSTALLATIONS ENTAILING

POTENTIAL RISKS OF DAMAGE TO PEOPLE OR TO THE ENVIRONMENT