Dolby Laboratories SDU4 Manual del usuario - Página 9
Navegue en línea o descargue pdf Manual del usuario para Media Converter Dolby Laboratories SDU4. Dolby Laboratories SDU4 20 páginas. Surround decoder
Imprimir páginaSurround Loudspeakers
The surround loudspeakers are used to distribute a single channel of sound in
a diffuse field behind the viewer. The number of loudspeakers needed,
therefore, depends upon the size of the area to be covered. In smaller rooms,
such as those used for video production and home surround installations, two
loudspeakers generally provide sufficient coverage.
Equalization
The monitor system used with the SDU4 should have its electro-acoustical
frequency response adjusted to conform with international standards for wide-
range audio monitoring. This standardized equalization is encouraged, as it
allows program material to be interchanged between various monitoring
rooms and, ultimately, the viewer's home, without apparent or objectionable
shifts in program equalization.
2.2
Mains Fuse and Voltage Selection
2.2.1 230V-Only SDU4
OPEN THE
OPEN THE
DOOR
DOOR
Figure 2.2 Fuse compartment, 230V unit
Open the fuse compartment door in the AC mains input connector with a small
flat blade screwdriver (see Figure 2.2), and check that the fuse has the correct
rating (T250mA 20mm time-lag). The fuse carrier must be inserted into the
compartment with the orientation as shown. Do not force the carrier into the
compartment. Damage will result.
2-2
METAL CLIP INSTALLED
ON UNUSED SIDE OF
CARRIER
MAIN
ACTIVE
FUSE
TOP
INSTALL
FUSE