Dolby Laboratories SDU4 사용자 설명서 - 페이지 9

{카테고리_이름} Dolby Laboratories SDU4에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dolby Laboratories SDU4 20 페이지. Surround decoder

Surround Loudspeakers

The surround loudspeakers are used to distribute a single channel of sound in

a diffuse field behind the viewer. The number of loudspeakers needed,

therefore, depends upon the size of the area to be covered. In smaller rooms,

such as those used for video production and home surround installations, two

loudspeakers generally provide sufficient coverage.

The monitor system used with the SDU4 should have its electro-acoustical

frequency response adjusted to conform with international standards for wide-

range audio monitoring. This standardized equalization is encouraged, as it

allows program material to be interchanged between various monitoring

rooms and, ultimately, the viewer's home, without apparent or objectionable

shifts in program equalization.

2.2

OPEN THE

DOOR

Figure 2.2 Fuse compartment, 230V unit

Open the fuse compartment door in the AC mains input connector with a small

flat blade screwdriver (see Figure 2.2), and check that the fuse has the correct

rating (T250mA 20mm time-lag). The fuse carrier must be inserted into the

compartment with the orientation as shown. Do not force the carrier into the

compartment. Damage will result.

2-2

METAL CLIP INSTALLED

ON UNUSED SIDE OF

CARRIER

MAIN

ACTIVE

FUSE

TOP

INSTALL

FUSE