Dolby Laboratories CP750 Manual de instalación - Página 6
Navegue en línea o descargue pdf Manual de instalación para Hardware informático Dolby Laboratories CP750. Dolby Laboratories CP750 19 páginas. 7.1 audio for the dolby multichannel amplifier
Imprimir página
- 1. Introduction to Dolby Cp750 7.1 Audio for the Dolby Multichannel Amplifier
- 2. About the Cp750 (or Other Cinema Processor) Configuration for the
- 3. Connecting a Cp750 (or Other Sound Processor) to a Media Block
- 4. Configuring Advanced Connections
- 5. Cp750 Audio Output Cable Pinouts
- 6. To 25-Pin D-Connector Digital Audio Pinouts
2 Requirements
These are the requirements for setting up 7.1 audio to work with a Dolby Audio Processor CP750
(or other sound processor) and the Dolby Multichannel Amplifier.
•
Transmitting audio from a media block
•
Connecting a CP750 (or other sound processor) to a media block
•
Converting audio with the Yamaha Tio1608-D
2.1 Transmitting audio from a media block
You need to transmit 7.1 audio from a digital cinema playback system media block to a CP750 (or
other cinema processor).
You can use any DCI-compliant media block to transmit 7.1 audio to the CP750 (or other audio
processor) AES3 digital audio input port. A Dolby IMS2000 media block is shown in the
following figure as an example. On the right side of the Dolby IMS2000 front panel, there are
two RJ-45 output ports labeled 1-8 and 9-16.
2.2 Connecting a CP750 (or other sound processor) to
a media block
You can connect a CP750 or other cinema processor to a digital cinema playback system media
block.
The CP750 receives digital audio from a media block through its 25-pin D-connector (labeled
4×AES IN). You make this connection using an RJ-45 to 25-pin D-connector adapter, as shown in
the following figures.
Dolby CP750 7.1 audio for the Dolby Multichannel Amplifier Installation Manual
7 May 2018 Issue 1
Requirements
6