Dolby Laboratories CP750 설치 매뉴얼 - 페이지 6

{카테고리_이름} Dolby Laboratories CP750에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dolby Laboratories CP750 19 페이지. 7.1 audio for the dolby multichannel amplifier

페이지 인쇄

2 Requirements

These are the requirements for setting up 7.1 audio to work with a Dolby Audio Processor CP750

(or other sound processor) and the Dolby Multichannel Amplifier.

•

Transmitting audio from a media block

•

Connecting a CP750 (or other sound processor) to a media block

•

Converting audio with the Yamaha Tio1608-D

2.1 Transmitting audio from a media block

You need to transmit 7.1 audio from a digital cinema playback system media block to a CP750 (or

other cinema processor).

You can use any DCI-compliant media block to transmit 7.1 audio to the CP750 (or other audio

processor) AES3 digital audio input port. A Dolby IMS2000 media block is shown in the

following figure as an example. On the right side of the Dolby IMS2000 front panel, there are

two RJ-45 output ports labeled 1-8 and 9-16.

2.2 Connecting a CP750 (or other sound processor) to

a media block

You can connect a CP750 or other cinema processor to a digital cinema playback system media

block.

The CP750 receives digital audio from a media block through its 25-pin D-connector (labeled

4×AES IN). You make this connection using an RJ-45 to 25-pin D-connector adapter, as shown in

the following figures.

Dolby CP750 7.1 audio for the Dolby Multichannel Amplifier Installation Manual

7 May 2018 Issue 1

Requirements