Dolby Laboratories CP750 설치 매뉴얼 - 페이지 4

{카테고리_이름} Dolby Laboratories CP750에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dolby Laboratories CP750 19 페이지. 7.1 audio for the dolby multichannel amplifier

페이지 인쇄

1 Introduction to Dolby CP750 7.1 audio for the

Dolby Multichannel Amplifier

This documentation shows you how to configure a Dolby Digital Cinema Processor CP750 (or

other cinema processor) for 7.1 (or 5.1) audio to work with a Dolby Multichannel Amplifier using a

Yamaha Tio1608-D analog-to-digital converter.

•

About the CP750 (or other cinema processor) configuration for the Dolby Multichannel

Amplifier

•

Contacting Dolby

•

Related documentation

1.1 About the CP750 (or other cinema processor)

configuration for the Dolby Multichannel Amplifier

You need to set up the CP750 (or other cinema processor) to transmit audio to a Dolby

Multichannel Amplifier.

The output of the Dolby Cinema Processor CP750 (and some other cinema processors) is analog

audio, and the input of the Dolby Multichannel Amplifier is AES67 digital audio. To connect these

devices, a converter is required. We have tested a Yamaha Tio1608-D, and it meets Dolby

standards.

1.2 Contacting Dolby

You can contact Dolby Cinema Solutions and Support using email or regional telephone

numbers.

Contact Dolby Cinema Solutions and Support

•

Send an email to [email protected].

•

Call:

Americas: +1-415-645-4900

Europe/Middle East/Africa (EMEA): +44-33-0808-7700

Asia-Pacific (APAC): +86-400-692-6780

Japan: +81-3-4540-6782

Access Dolby documentation

Visit www.dolbycustomer.com.

Access Yamaha documentation

Visit http://www.yamahaproaudio.com/europe/en_gb/downloads/manuals.

Submit feedback about Dolby documentation

Send an email to [email protected].

Dolby CP750 7.1 audio for the Dolby Multichannel Amplifier Installation Manual

7 May 2018 Issue 1