Dolby Laboratories CP750 Instrukcja instalacji - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Sprzęt komputerowy Dolby Laboratories CP750. Dolby Laboratories CP750 19 stron. 7.1 audio for the dolby multichannel amplifier

Drukuj stronę

Dolby Laboratories CP750 Instrukcja instalacji

1 Introduction to Dolby CP750 7.1 audio for the

Dolby Multichannel Amplifier

This documentation shows you how to configure a Dolby Digital Cinema Processor CP750 (or

other cinema processor) for 7.1 (or 5.1) audio to work with a Dolby Multichannel Amplifier using a

Yamaha Tio1608-D analog-to-digital converter.

•

About the CP750 (or other cinema processor) configuration for the Dolby Multichannel

Amplifier

•

Contacting Dolby

•

Related documentation

1.1 About the CP750 (or other cinema processor)

configuration for the Dolby Multichannel Amplifier

You need to set up the CP750 (or other cinema processor) to transmit audio to a Dolby

Multichannel Amplifier.

The output of the Dolby Cinema Processor CP750 (and some other cinema processors) is analog

audio, and the input of the Dolby Multichannel Amplifier is AES67 digital audio. To connect these

devices, a converter is required. We have tested a Yamaha Tio1608-D, and it meets Dolby

standards.

1.2 Contacting Dolby

You can contact Dolby Cinema Solutions and Support using email or regional telephone

numbers.

Contact Dolby Cinema Solutions and Support

•

Send an email to [email protected].

•

Call:

Americas: +1-415-645-4900

Europe/Middle East/Africa (EMEA): +44-33-0808-7700

Asia-Pacific (APAC): +86-400-692-6780

Japan: +81-3-4540-6782

Access Dolby documentation

Visit www.dolbycustomer.com.

Access Yamaha documentation

Visit http://www.yamahaproaudio.com/europe/en_gb/downloads/manuals.

Submit feedback about Dolby documentation

Send an email to [email protected].

Dolby CP750 7.1 audio for the Dolby Multichannel Amplifier Installation Manual

7 May 2018 Issue 1