Cypress CY3633 Manual del usuario - Página 17

Navegue en línea o descargue pdf Manual del usuario para Microcontroladores Cypress CY3633. Cypress CY3633 20 páginas. Wirelessusb ls gaming dvk

3.1.6 XBOX Memory Unit Support

The stacked HUB ports on the USB Hub Adapter board are used as memory expansion ports, sim-

ilar to those found on standard wired XBOX game controllers. In order to interface standard XBOX

peripherals to the stacked USB connector, a custom adapter cable must be made (this cable is not

included in the Gaming DVK). Please refer to the XBOX Memory Unit Cable Assembly drawing in

the Hardware folder on the included CD-ROM for detailed assembly instructions if you require this

cable.

As noted earlier, development for the PSoC device requires the PSoC ICE-4000. The ICE and

other associated development peripherals can be found at Cypress MicroSystems' website at

www.cypressmicro.com. This document assumes that the reader is familiar with the tool. The

PSoC Microcontroller Basic Development Kit (CY3205-DK) provides the PSoC ICE-4000 In-Circuit

Emulator for developing and debugging (with breakpoint and trace support) of PSoC application

code. The PDIP Pod Kit (CY3206-PI) provides programming and emulation support for the 48-pin

DIP package used on the PDC-9075 Platform Boards. Also note that the 48 pin adapter boars can

be programed like an actual chip and they also include the ability for ISSP programming. Refer to

Cypress MicroSystems application note AN2066a for additional information.

Figure 10 shows the complete development environment.

•

Connect the ICE Pod into socket U3 of the Platform Board (PDC-9075).

•

Connect the CAT5e cable between the ICE Pod and the ICE-4000.

•

Plug the 5.0V DC adapter into connector J5 of the PDC-9075 board.

WirelessUSB™ LS Gaming DVK User's Guide Rev 1.1

Page -13