Cypress CY3633 Kullanıcı Kılavuzu - Sayfa 17
Mikrodenetleyiciler Cypress CY3633 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cypress CY3633 20 sayfaları. Wirelessusb ls gaming dvk
Sayfayı Yazdır3.1.6 XBOX Memory Unit Support
The stacked HUB ports on the USB Hub Adapter board are used as memory expansion ports, sim-
ilar to those found on standard wired XBOX game controllers. In order to interface standard XBOX
peripherals to the stacked USB connector, a custom adapter cable must be made (this cable is not
included in the Gaming DVK). Please refer to the XBOX Memory Unit Cable Assembly drawing in
the Hardware folder on the included CD-ROM for detailed assembly instructions if you require this
cable.
3.2 Game Controller Firmware Development
As noted earlier, development for the PSoC device requires the PSoC ICE-4000. The ICE and
other associated development peripherals can be found at Cypress MicroSystems' website at
www.cypressmicro.com. This document assumes that the reader is familiar with the tool. The
PSoC Microcontroller Basic Development Kit (CY3205-DK) provides the PSoC ICE-4000 In-Circuit
Emulator for developing and debugging (with breakpoint and trace support) of PSoC application
code. The PDIP Pod Kit (CY3206-PI) provides programming and emulation support for the 48-pin
DIP package used on the PDC-9075 Platform Boards. Also note that the 48 pin adapter boars can
be programed like an actual chip and they also include the ability for ISSP programming. Refer to
Cypress MicroSystems application note AN2066a for additional information.
3.2.1 Hardware Configuration For Controller Firmware Development
Figure 10 shows the complete development environment.
•
Connect the ICE Pod into socket U3 of the Platform Board (PDC-9075).
•
Connect the CAT5e cable between the ICE Pod and the ICE-4000.
•
Plug the 5.0V DC adapter into connector J5 of the PDC-9075 board.
WirelessUSB™ LS Gaming DVK User's Guide Rev 1.1
Page -13