Ashly Protea NE4250.10 Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Amplificador Ashly Protea NE4250.10. Ashly Protea NE4250.10 16 páginas. Network enabled multi-channel power amplifiers
También para Ashly Protea NE4250.10: Manual de instrucciones (16 páginas), Manual de instrucciones (16 páginas), Hoja de especificaciones (2 páginas), Especificaciones (2 páginas), Manual de instrucciones (16 páginas), Manual de instrucciones (20 páginas), Manual de instrucciones (20 páginas)

Ashly Protea NE4250.10 Manual de instrucciones
Operating Manual - NE Multi Channel Power Amplifier
WR-1 Remote Level Control - The WR-1 is a dual potentiometer remote volume control designed to fit in a standard
wall electrical box, and is wired to the amplifier (with or without DSP installed) back panel Euroblock connector labeled "Remote
Level Control" using four conductor wire. If wiring a custom potentiometer assembly other than the WR-1, connect +5V from
the Remote Level Control Euroblock connector to the potentiometer's CW pin, GND to the CCW pin, and the channel under
control to the wiper. Do not connect the WR-1 remote level control ground to any other external grounds.
WR-2 Remote Preset Recall Switches - The WR-2
(shown at right) allows selection of one of four presets via
interlocking pushbutton switches. Each pushbutton switch can
be connected to a Preset Recall Pin on the back panel of the
amplifier. The terminal numbers correspond to the first 4 Preset
Memory locations in the controlled amplifier. Pressing a button
will select the corresponding preset. Windows are provided by
each switch for a user-generated label.
combines one potentiometer for remote level control with a four position rotary switch for preset recall.
WR-1.5 Remote Level Control and Preset Recall Switch - The WR-1.5 (shown at left)
9