Ashly Protea NE4250.10 Manual de instruções - Página 9

Procurar online ou descarregar pdf Manual de instruções para Amplificador Ashly Protea NE4250.10. Ashly Protea NE4250.10 16 páginas. Network enabled multi-channel power amplifiers
Também para Ashly Protea NE4250.10: Manual de instruções (16 páginas), Manual de instruções (16 páginas), Ficha de especificações (2 páginas), Especificações (2 páginas), Manual de instruções (16 páginas), Manual de instruções (20 páginas), Manual de instruções (20 páginas)

Operating Manual - NE Multi Channel Power Amplifier

WR-1 Remote Level Control - The WR-1 is a dual potentiometer remote volume control designed to fit in a standard

wall electrical box, and is wired to the amplifier (with or without DSP installed) back panel Euroblock connector labeled "Remote

Level Control" using four conductor wire. If wiring a custom potentiometer assembly other than the WR-1, connect +5V from

the Remote Level Control Euroblock connector to the potentiometer's CW pin, GND to the CCW pin, and the channel under

control to the wiper. Do not connect the WR-1 remote level control ground to any other external grounds.

WR-2 Remote Preset Recall Switches - The WR-2

(shown at right) allows selection of one of four presets via

interlocking pushbutton switches. Each pushbutton switch can

be connected to a Preset Recall Pin on the back panel of the

amplifier. The terminal numbers correspond to the first 4 Preset

Memory locations in the controlled amplifier. Pressing a button

will select the corresponding preset. Windows are provided by

each switch for a user-generated label.

combines one potentiometer for remote level control with a four position rotary switch for preset recall.

WR-1.5 Remote Level Control and Preset Recall Switch - The WR-1.5 (shown at left)