Asian Electron YK-PIC30122KVA Manual de instrucciones - Página 9
Navegue en línea o descargue pdf Manual de instrucciones para Inversor Asian Electron YK-PIC30122KVA. Asian Electron YK-PIC30122KVA 16 páginas. 19” rack mount pure sine wave inverter with build in battery charger
2-4-3 Before proceeding further, carefully check that cable you have just connected
negative terminal of unit to the negative output power source.
2-4-4 Connect the cable from the negative terminal of the unit to the negative terminal of
the power source. Make a secure connection.
2-4-5 Set the power switch to the ON position; you will hear the "bi-bi-bi" sound. At the
same time, the display shows the word "ASIAN" for two times. After that, you will
hear the continuous sound from internal alarm. Then, the AC voltage shows on
the display. It means the device has done the operation.
2-4-6 Set the power switch to the OFF position; the device shuts down completely.
2-4-7 Please use a power meter to accurately measure the true output R.M.S. voltage
of the unit.
Our company uses a power meter such as IDRC CP-350 or ABM 2019 to
measure our product.
WARNING!
Make sure all the DC connections are tight (torque to 9-10
ft-lbs, 11.7-13Nm). Loose connections will overheat and could
result in a potential hazard.
CAUTION!
Reverse polarity connection will blow a fuse in unit and may
permanently damage the unit.
Damage caused by reversing polarity connection is not
covered by our warranty.
WARNING!
You may observe a spark when you make this connection
since current may flow to charge capacitors in the power
inverter.
Do not make this connection in the presence of flammable
fumes. Explosion or fire may result.
8