EG Vienna 250 Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Bicicleta EG Vienna 250. EG Vienna 250 8 páginas. Folding electric bicycle
También para EG Vienna 250: Manual del usuario (9 páginas)

Imprimir página

LED to turn it on.

9. Install the Main Li-on battery by sliding the battery in with the lock side facing you. Ensure

you lock the battery in place before removing the key. Then, lock in the battery in place

with the key.

10. To turn on the electrical system of the Vienna 250, open the silicone tab on the left front

of the frame of the bike where the tube meets the stem area, and flip the switch "On" on

the battery. The USB socket on the battery can be used to charge a 5v device typically, a

smartphone or a portable audio player. Please be aware that this USB socket draws its

power from the same Lion battery that runs your bike, hence using it to power some

device, will slightly reduce your electrical range on the bike.

How to Fold the Bicycle

First make sure your saddle and the handle bars are lowered.

To fold the handlebar stem, slide the safety switch and then tug on the quick release and

move it all the way down to unhook the stem.

! WARNING: if your pedals don't fold easily do not force them to do so, or you will risk

breaking the pedals.

Next fold, the pedals, by gently pressing in the pedals horizontally and then they will

effortlessly fold into their natural vertical position.

To fold the frame of the bike, lift the safety tab and then unhook the quick release, and

bring the quick release lever all the way towards the back of the bike. Next, gently bend

the frame to fold it.

OPERATION INSTRUCTIONS

How to operate the Electric Bicycle

The Electric bicycle can be operated in 3 different modes:

1. Manual Mode –

 Make sure the Battery Meter/power meter on the left of the handlebar is "OFF" and

then, pedal the bicycle normally as you would any bicycle.

2a. Pedal Assist Mode (LOW) –

 Turn on the battery power to the electric bike by switching on the Battery. Switch is on

the battery.

 Press the red "ON/OFF" button on the meter located to the left of the handlebar to

turn "ON" the system. Pedal the bicycle normally as you would any bicycle.

 The motor will stop if the brake lever is depressed even if you are still peddling the

bicycle.

 The motor will stop when you stop peddling in this mode.

 When first switched "ON" the motor starts off in the "LOW" power mode.

 In this mode the motor is very power efficient, and will assist you with the least power

as you pedal.

 In "LOW" mode, the system provides you with the most "miles per charge" of battery

power use among the pedal assist modes.