EG Vienna 250 Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Bicicleta EG Vienna 250. EG Vienna 250 8 páginas. Folding electric bicycle
También para EG Vienna 250: Manual del usuario (9 páginas)

Imprimir página

 Inspect the bicycle frequently. Failure to inspect the bicycle and to make repairs or

adjustments, as necessary, can result in injury to the rider or to others. Make sure all

parts are correctly assembled and adjusted as written in the owner's manual.

 Immediately replace any damaged, missing, or worn parts.

 Make sure all fasteners are correctly tightened as written in the owner's manual

 Parts that are not properly tightened can be lost or operate poorly.

 Do not over tighten parts, as over-tightening may damage the part.

 Make sure any replacement fasteners are of the correct type and size.

 If your own a bike with an aluminum frame, inspect the bicycle frame carefully and

frequently as Aluminum frames can develop micro fractures from stress, severe impact

and shocks. If you see these micro fractures or cracks, stop riding the bicycle

immediately.

 In case of micro fractures, have the bicycle frame repaired and inspected by a qualified

professional before riding the bicycle again.

NOTE: Have a bicycle service shop make any repairs or adjustments for which you do not have

the correct tools to or if you do not sufficiently understand the instructions set forth in this electric

bicycle's manual supplement or the bicycle owner's manual.

Inspection of the Bearings Maintenance

1. Frequently check the bearings of the bicycle. Have a bicycle service shop lubricate the

bearing once a year or any time they do not pass the tests as noted in the Bicycle

owner's manual.

Serial Numbers to your EG Electric Bike

1. The serial number is located on the under side of the bike below the bottom bracket tube

near the crank of the bike in the middle. To see it one, turn the bike upside-down.

How to detach the rear wheel of the Electric bike

1. ! WARNING: We do not condone modifying the EG Electric Bicycle in any way shape or

form. Modifying the bike in any way, will void your Warranty. The instructions below are

written only for the maintenance or repair of the bike.

2. To detach the rear wheel, first unhook the connector near the rear wheel.

3. Unscrew the nuts on both sides of the rear axle and the wheel should come right off.

4. Unhook the chains from the rear freewheel (gears)

5. To install it back on, please note and reverse all the detachment instructions.