ACR Electronics RCL-600 SEARCHLIGHT Manual de soporte del producto - Página 10
Navegue en línea o descargue pdf Manual de soporte del producto para Luz de inundación ACR Electronics RCL-600 SEARCHLIGHT. ACR Electronics RCL-600 SEARCHLIGHT 12 páginas. Remote control searchlight with joystick remote control panel
Imprimir página3.7
Bulb Replacement (see Figure 7)
A 150W xenon short arc lamp is provided with your RCL-600A. If it should need
replacement, it must be ordered through ACR Electronics, Inc., by P/N A1-14-
0093.
To replace the lamps:
Warning: Do NOT touch glass or parabolic reflectors with fingers or tools! Use
cloth gloves.
1. Disconnect unit from power source and allow cooling.
2. Remove four screws holding front flange and glass with provided 6mm hex
wrench.
3. Loosen mounting collar of lamp by turning collar counter clockwise. Unhook
wire from opposite end of lamp. Pull lamp out of mounting collar. Installation
is done in reverse order.
4. Replace front flange and glass and install the four retaining screws. Be sure
gasket is securely in place.
5. Reconnect unit to power source.
FIGURE 7
9
Y1-03-0139 Rev. C