ACR Electronics RCL-600 SEARCHLIGHT Руководство по поддержке продукта - Страница 10

Просмотреть онлайн или скачать pdf Руководство по поддержке продукта для Заливающий свет ACR Electronics RCL-600 SEARCHLIGHT. ACR Electronics RCL-600 SEARCHLIGHT 12 страниц. Remote control searchlight with joystick remote control panel

Печатать страницу

3.7

Bulb Replacement (see Figure 7)

A 150W xenon short arc lamp is provided with your RCL-600A. If it should need

replacement, it must be ordered through ACR Electronics, Inc., by P/N A1-14-

0093.

To replace the lamps:

Warning: Do NOT touch glass or parabolic reflectors with fingers or tools! Use

cloth gloves.

1. Disconnect unit from power source and allow cooling.

2. Remove four screws holding front flange and glass with provided 6mm hex

wrench.

3. Loosen mounting collar of lamp by turning collar counter clockwise. Unhook

wire from opposite end of lamp. Pull lamp out of mounting collar. Installation

is done in reverse order.

4. Replace front flange and glass and install the four retaining screws. Be sure

gasket is securely in place.

5. Reconnect unit to power source.

FIGURE 7

Y1-03-0139 Rev. C