ACR Electronics RCL-75 Manual de soporte del producto - Página 15
Navegue en línea o descargue pdf Manual de soporte del producto para Luz de inundación ACR Electronics RCL-75. ACR Electronics RCL-75 20 páginas. Remote control searchlight system
También para ACR Electronics RCL-75: Manual de soporte del producto (15 páginas), Manual de soporte del producto (20 páginas)
Imprimir página
block and screw tightened securely. Gather wires together and install
new cable ties (see Figure 19).
21)
Replace the top cover carefully, making sure the partition is
seated in its proper groove and the screw holes at the front match the
metal braces.
22)
Reinstall the four (4) long cover screws starting from the
back and work forward, then install the two (2) top screws at each side
(total of 4). Tighten all screws securely, taking care not to over-tighten.
23)
The light assembly is ready to be reinstalled on mount.
Reattach control cable and wire power leads. Precautions should be
taken to make power connections as water tight as possible.
Figure 19
Y1-03-0158G
Figure 18
14