Ambient Weather RC-6050 ClearView Manual del usuario - Página 10
Navegue en línea o descargue pdf Manual del usuario para Radio reloj Ambient Weather RC-6050 ClearView. Ambient Weather RC-6050 ClearView 13 páginas. Clearview am/fm radio controlled projection alarm clock with indoor temperature
Imprimir página5.6 Projector and Backlight
5.6.1 Using the Projector and Backlight
Note: The projector and backlight are temporary when operating on batteries only, to save
battery life.
1. When the clock is powered by the battery:
1.1 Press SNOOZE/LIGHT key to turn on the projector and backlight for 5 seconds.
1.2 Or press and hold SNOOZE/LIGHT key for 4 seconds to turn on the projector for 30
minutes. During the projection, press the SNOOZE/LIGHT key again to turn off the
projection.
2. When the clock is powered by the AC adapter:
2.1 Slide the PROJECTION ON/OFF switch to the ON position, and the projection will be on
all the time, or slide it to the OFF position to return to normal mode.
2.2 Slide the LIGHT ON/OFF switch to ON position, and the backlight will be on all the time,
or slide it to OFF position to return to normal mode.
5.6.2 Projector Backlight Rotation
1. Press SNOOZE/LIGHT key to turn on the projector and backlight.
2. Press the REVERSE key
5.6.3 Adjusting Backlight Focus
Adjust the focus of the projected data by rotating the focus knob on the projector.
5.7 Low Battery Indictor
When the battery is full, no battery icon will be displayed. When the battery is low, the low battery
indicator will be displayed. Replace with 3 new AA size batteries. Pay attention to the polarity. After
the batteries are replaced, unplug an plug in the AC adapter to clear the low battery indicator.
Version 1.0
©Copyright 2015, Ambient LLC. All Rights Reserved.
to reverse the projected data 180 degrees.
Figure 10
Figure 11
Page 10