Ambient Weather RC-6050 ClearView Manuel de l'utilisateur - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Ambient Weather RC-6050 ClearView. Ambient Weather RC-6050 ClearView 13 pages. Clearview am/fm radio controlled projection alarm clock with indoor temperature

Imprimer la page

1. Time Zone Settings

5.6 Projector and Backlight

5.6.1 Using the Projector and Backlight

Note: The projector and backlight are temporary when operating on batteries only, to save

battery life.

1. When the clock is powered by the battery:

1.1 Press SNOOZE/LIGHT key to turn on the projector and backlight for 5 seconds.

1.2 Or press and hold SNOOZE/LIGHT key for 4 seconds to turn on the projector for 30

minutes. During the projection, press the SNOOZE/LIGHT key again to turn off the

projection.

2. When the clock is powered by the AC adapter:

2.1 Slide the PROJECTION ON/OFF switch to the ON position, and the projection will be on

all the time, or slide it to the OFF position to return to normal mode.

2.2 Slide the LIGHT ON/OFF switch to ON position, and the backlight will be on all the time,

or slide it to OFF position to return to normal mode.

5.6.2 Projector Backlight Rotation

1. Press SNOOZE/LIGHT key to turn on the projector and backlight.

2. Press the REVERSE key

5.6.3 Adjusting Backlight Focus

Adjust the focus of the projected data by rotating the focus knob on the projector.

5.7 Low Battery Indictor

When the battery is full, no battery icon will be displayed. When the battery is low, the low battery

indicator will be displayed. Replace with 3 new AA size batteries. Pay attention to the polarity. After

the batteries are replaced, unplug an plug in the AC adapter to clear the low battery indicator.

Version 1.0

to reverse the projected data 180 degrees.

Figure 10

Figure 11

Page 10