Ambir DocketPORT 687 Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Escáner Ambir DocketPORT 687. Ambir DocketPORT 687 10 páginas. Duplex id card & license scanner

Imprimir página

Using your Scanner .....................

Important note: Before using your scanner for the first time you must calibrate the unit.

Performing Initial Scanner Calibration

There are two different ways to calibrate your scanner:

1) Calibrate from Scanners and Cameras under Control Panel

a. Go to: Windows "START" / Control Panel /(Printer and Other Hardware)

Scanners and Cameras; you will see your model listed here.

b. Right click on your scanner model and a pull down window will appear.

c. Select "Calibrate" option to start this process.

d. Vista users need to right click on the scanner model and go to "Properties".

e. Insert the calibration target and select "Calibrate" button.

2) From your bundled software application ( or your own TWAIN compliant application)

a. Install the bundled software application.

b. Under the menu toolbar select: File / Select Source (Scanning Source).

c. Choose your scanner model "DocketPORT 687".

d. Do not select the "WIA-DocketPORT 687" at this time.

e. Under the menu toolbar select: File / Acquire Image Data...

f. The TWAIN user interface appears (see image below).

g. Insert the calibration target that came with your scanner then select "Calibrate".

NOTE: If scanned image quality has become unsatisfactory, we recommend you first clean the scanner with

the included cleaning sheet and then recalibrate the scanner.

NOTE: Should you lose or forget the calibration target when traveling, you can simply use any plain "white" piece of

printer paper cut to (4" x 6") to perform the calibration. Accept the message to proceed to scanning.

- 7 -