AMC 350 Manuel d'instructions - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel d'instructions pour {nom_de_la_catégorie} AMC 350. AMC 350 17 pages.
Imprimer la pageAMC-350 Sensor/Transmitter
FIGURE 4: Transmitter wiring layout.
4.3 COMPUTER, DATALOGGER OR NON-AMC INTERFACE
Refer to FIGURE 5 for the following.
All Armstrong sensor/transmitter units can be interfaced with computers or dataloggers through
analog-to-digital converters.
The signal output from the transmitter is a 4 to 20 mA DC current. This can be measured from
the signal wire, or if a voltage measurement is needed, connect a load resistor (250 ohms max)
between the transmitter signal output (S) and power supply ground (–).
9