AMC 350 Talimatlar Kılavuzu - Sayfa 11

Verici AMC 350 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. AMC 350 17 sayfaları.

AMC-350 Sensor/Transmitter

FIGURE 4: Transmitter wiring layout.

4.3 COMPUTER, DATALOGGER OR NON-AMC INTERFACE

Refer to FIGURE 5 for the following.

All Armstrong sensor/transmitter units can be interfaced with computers or dataloggers through

analog-to-digital converters.

The signal output from the transmitter is a 4 to 20 mA DC current. This can be measured from

the signal wire, or if a voltage measurement is needed, connect a load resistor (250 ohms max)

between the transmitter signal output (S) and power supply ground (–).