AMC 350 Talimatlar Kılavuzu - Sayfa 10

Verici AMC 350 için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. AMC 350 17 sayfaları.

AMC-350 Sensor/Transmitter

4.2 CABLE SELECTION AND WIRING

The transmitter output (–, S, +) terminal block connects to the (–, S, +) connections on a

channel terminal block of the monitor (one transmitter per channel), as shown in FIGURE 4.

Connection should be made using 3-conductor, shielded cable (shield must be grounded at the

monitor). Run cable through steel conduit for best signal transmission and maximum allowable

distances.

The maximum permissible distance between the transmitter and monitor is

dependant on wire gauge as shown in the following Cable Selection Chart (FIGURE 3)

FIGURE 3: Cable Selection Chart.