AMC 350 사용 설명서 - 페이지 10

{카테고리_이름} AMC 350에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AMC 350 17 페이지.

AMC-350 Sensor/Transmitter

4.2 CABLE SELECTION AND WIRING

The transmitter output (–, S, +) terminal block connects to the (–, S, +) connections on a

channel terminal block of the monitor (one transmitter per channel), as shown in FIGURE 4.

Connection should be made using 3-conductor, shielded cable (shield must be grounded at the

monitor). Run cable through steel conduit for best signal transmission and maximum allowable

distances.

The maximum permissible distance between the transmitter and monitor is

dependant on wire gauge as shown in the following Cable Selection Chart (FIGURE 3)

FIGURE 3: Cable Selection Chart.