AMC 350 Petunjuk Manual - Halaman 10

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Pemancar AMC 350. AMC 350 17 halaman.

AMC-350 Sensor/Transmitter

4.2 CABLE SELECTION AND WIRING

The transmitter output (–, S, +) terminal block connects to the (–, S, +) connections on a

channel terminal block of the monitor (one transmitter per channel), as shown in FIGURE 4.

Connection should be made using 3-conductor, shielded cable (shield must be grounded at the

monitor). Run cable through steel conduit for best signal transmission and maximum allowable

distances.

The maximum permissible distance between the transmitter and monitor is

dependant on wire gauge as shown in the following Cable Selection Chart (FIGURE 3)

FIGURE 3: Cable Selection Chart.