ACR Heat HERITAGE N25 Manuel d'installation et d'utilisation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} ACR Heat HERITAGE N25. ACR Heat HERITAGE N25 10 pages.

Imprimer la page

GENERAL INFORMATION

Output

Chimney Draft required

Weight

Flue Diameter

Material

OPTIONAL EQUIPMENT

Multifuel grate and ashpan kit

PLEASE INSERT LINE DRAWING SHOWING FULL MEASUREMENTS

OF THIS MODEL – FRONT & SIDE DRAWINGS IF POSSIBLE PLEASE

CLEARANCES REQUIRED

Hearth Requirements

The appliance must stand on a fireproof hearth made of non-combustible

materials with a minimum thickness of 12mm.

constructed on timber there must be a clearance of at least 250mm from

the timber to the top surface of the hearth. A 300mm hearth must be

provided to the front of the appliance with 150mm of hearth either side of

the appliance. (All clearances are based on brickwork of a minimum of

200mm thickness)

A gap of 150mm is required at the back of the appliance from a non-

combustible wall. This can be reduced to a minimum gas of 50mm when

the non-combustible wall is at least 200mm thick.

A clearance of 300mm from the top of the appliance (not including

canopy) is required.

THE MANUFACTURER WILL NOT BE HELD RESPONSIBLE FOR

DAMAGES TO THE APPLIANCE DUE TO THE USE OF PROHIBITED

FUEL OR IF THE APPLIANCE HAS NOT BEEN INSTALLED AS PER THE

MANUAL AND / OR CURRENT BUILDING REGULATIONS

PRODUCT INFORMATION

2–12Kw (doors closed) 2–7Kw (doors open)

Cast Iron

If the hearth is