AME 24820 Manuel d'instruction et décomposition des pièces - Page 10

Parcourez en ligne ou téléchargez le pdf Manuel d'instruction et décomposition des pièces pour {nom_de_la_catégorie} AME 24820. AME 24820 18 pages. Automatic tire inflator 3 modes in one

Imprimer la page

4.0

Troubleshooting, cont.

The following chart has been prepared to assist with diagnosis of faults

PROBLEM

POSSIBLE CAUSE

ER6

Programme or PCB Error

ER8

Calibration Error

ER9

Automatic Calibration Check/

Calibration Error

ERP

Unstable supply pressure

Hose disconnection during inflate cycle Check hose connection.

ERU

Short circuitry on valve connection

ERB

Short circuitry on buzzer connection

AME INTERNATIONAL

INSTRUCTION MANUAL

& PARTS BREAKDOWN

- 10 -

SOLUTION

Reset machine by switching off

power for 5 seconds. If error

message reappears replace PCB.

Unit requires calibration,

contact your local distributor

or service agent.

Disconnect hose connector, reset

machine by switching off power

for 5 seconds. The ER9 message

will clear automatically when the

factory calibration is restored.

If the ER9 message continues to

reappear, replace the PCB.

Check the supply pressure.

Check and dry up the valve connection.

Check and dry up the buzzer connection.