Coastal WEATHERPAK Manuel de configuration

Parcourez en ligne ou téléchargez le pdf Manuel de configuration pour {nom_de_la_catégorie} Coastal WEATHERPAK. Coastal WEATHERPAK 2 pages. Tactical weather station

Imprimer la page

Tactical Weather Station Set-Up Guide

Wind Sensor

WEATHERPAK

KamLock Connector

Junction Box

Visibility

Sensor

Tower Top

Tower Base

Power Supply

(Battery Box)

820 First Avenue South, Seattle, WA 98134

Cloud Height Sensor

(Ceilometer)

Tel: +1 (800) 488-8291 / +1 (206) 682-6048

This is a generic overview of a portable WEATHERPAK

3 meter tripod set-up. Your system may not include all of

the components listed, or may have different components.

Please refer to the assembly documentation provided with

your system or contact Coastal for assistance.

1. Select a level piece of ground about 4 meters in diameter. To

avoid compass error, place the WEATHERPAK

meters, laterally, from any mass of steel (trucks, buildings, etc). In

other words, mounting on top of a van is OK, but right next to it is

not an ideal location.

2. Assemble the lower tower section: Insert the three legs into the

tower base and secure with a turn clockwise, forming a tripod.

Place the tripod in the center of the 4-meter diameter area.

3. Secure the WEATHERPAK

slot on the WEATHERPAK

slot in the KamLock connector. Carefully, but firmly, seat the

WEATHERPAK

into the KamLock (the fit is precision-machined

and may require an extra push). Push the arms of the KamLock

clamp down to assure proper installation.

4. Place the entire unit (upper tower section and WEATHERPAK

onto the tripod and turn clockwise to secure. Hand tighten the

screw.

Rain Gauge

Fax: +1 (206) 682-5658

at least 30

to the tower top: Line up the

bottom connector with the pin

www.CoastalEnvironmental.com

)

4/9/12